10wk,2025 : Successful Case

■ Product Name : Push Rod LH/RH

■ Resin : PA66+CF20%

■ Weight : 2.4g+1.4g+1.2g+4.7g

■ System Type : TINA EPT VVSC

■ Cavity : 4+4

Description 说明：

● The product is an automotive sunroof push rod made of PA66+CF20%, with a wall thickness of 0.8mm, consisting of multiple small products of varying sizes.

产品为汽车天窗推杆，材料PA66+CF20%，壁厚0.8mm，为多个大小不一的小产品。

● The iron parts are injection molded, with high requirements for balancing multiple products during the injection process. The product appearance requires strict control of gate burrs and parting line flash.

包铁件注塑，多个产品进胶平衡要求高，产品外观对浇口毛边和分型面披风要求控制严格。

● The matched nozzle uses EPT wound heating wire, providing sufficient heat, and the threaded connection of the nozzle solves the leakage issue often encountered in high- pressure injection molding.

匹配热嘴采用EPT缠绕式发热丝加热，热量充足，热嘴螺纹连接解决高压注塑容易发生的溢料问题。

●  The hot runner system is a 24-drop valve system, designed according to the YUDO multi-cavity concept to ensure balanced material flow.

热流道为24点阀针系统， 按照YUDO多腔理念平衡设计，保证出胶平衡。

●  The hot runner system uses special wear-resistant steel, with optimized and compressed manifold thickness and width, minimizing mold cutout, making it highly suitable for this type of product.

热流道系统采用专用耐磨钢材，同时分流板厚度及宽度精简压缩，最大程度减少模具开框，非常适合此类产品使用。

Market